Ghost Multicasting :: essays research papers

Ghost Multicasting allows one computer, the Ghost waiter, to transfer a Ghost image from the emcee and then redirects the image to opposite workstations, the Ghost Clients, through the use of TCP/IP settings everywhere the network. The chief(prenominal) advantage of Ghost Multicasting is that the downloading time is extremely shortened as only when one PC is downloading the image off the Server which dramatically reduces the adventure of heavy network traffic.The only disadvantage is that the PC chosen to be the Ghost Server has to get hold of enough free hard get down space to store the image which will then be redistributed.The devil Methods Of Ghost Multicasting.Manually undertake Ghost Multicast Using this method you have to manually sequester unique IP add onresses for the Client PCs by use and configuring the wattcp.cfg file located on each Clients blast disk.Automatically Specified Ghost Multicast This second method is by using Windows NT to automatically assi gn IP addresses to the Client PCs by the use of the Dynamic Host kind Protocol, or DHCP, included in Windows NT ver. 4.00.Manually Specified Ghost Multicasting circumstance Up Ghost Server Disk1. Prepare a boot disk that includes and loads the necessary network drivers and maps the disk images directory from the network.2. Copy everyplace the DOS Ghost Server program (dosghsrv.exe) to the analogous disk and add it to the autoexec.bat file. 3. Copy over the wattcp.cfg file to the disk and change the IP Address, Subnet hide and Gateway according to network. (A special IP Address should be allocated for the Server PC)Setting Up Client Disks1. Prepare boot disks in the same order for the server boot disk but copy over ghost.exe instead of dosghsrv.exe.2. Edit the wattcp.cfg and add in a unique IP Address for each boot disk. (Usually IP Addresses would have been set up earlier for the specific use of identifying ghost client PCs) Ghosting Client PCs1. blame up the PC which will act as the Ghost Server with the Server armorial bearing Disk and load dosghsrv.exe from the DOS command prompt.2. type in a Session Name and select the Image single file from the disk images directory on the network.3. Start up Client PCs with the unique Boot Disks and load ghost.exe. From the Ghost Server, you should see the IP Addresses of the Clients appear in the windowpane as each Client PC loads the Ghost program.4. once every Client PCs IP Address can be seen in the Ghost Server window, you are able to select them all by clicking on Accept Clients.